Manually Provision ATA

Manually Provision ATA

Portal Steps:
  1. Login https://dctechitllc.simplelogin.net
  2. Hosted PBX
  3. Users
  4. Select User
  5. Phones Tax
  6. Add Phone
  7. Select Model
  8. Select Server
  9. Enter Mac Address
  10. Line: 1
  11. Save
Find IP Address of ATA:
1. Call ***
2. Enter 02
Take note of IP Address

Setup Phone via GUI
  1. Open web browser
  2. Enter in http:// then IP address that you noted earlier
  3. Login
    1. username: admin
    2. password: admin
  4. If need to change login make note of changes. 
  5. Advanced Settings Tab
  6. Config Server Path: auto.simplelogin.net/cfg
  7. Update
  8. Apply 
  9. Reboot
  10. Click on profile tab
  11. enter Basic SIP Server: domain#.Core2-mia.ringlogix.com
  12. enter outbound proxy: pbx1-mia.ringlogix.com
  13. Update
  14. Apply 
  15. Reboot
  16. Click on FXS tab
  17. Authenticate ID: User's extensions
  18. User: User's extensions
  19. Password: Copy from dialog
  20. Update
  21. Apply 
  22. Reboot

    • Related Articles

    • Provisioning Phones

      Notes: Always factory reset your phone before trying to auto provision it. Ensure your device is running a current firmware version. Devices with old firmware may not provision or function properly. GrandStream Find IP for the Device Plug in an ...